Wire Guide
Your personalised step-by-step wiring checklist. Cable calculations, commissioning sequence, and safety checks — all tailored to YOUR specific components and rig type.
No active rig
Create or select a rig to get started
0 of 19 steps complete · 19 remaining
Verify all components against your plan
Check each component's specs match what you sized. Look for shipping damage. Verify model numbers.
Plan your cable runs and measure lengths
Map every cable route. Add 20% extra for curves and strain relief. Record actual lengths.
Calculate cable sizes for every run
Use the Cable Run Calculator below. Vdrop must be < 3% for 12V, < 2% for 24V. Upsize if marginal.
Create a rig to export your wire guide.
Want to understand WHY these steps matter?
The Rules Registry contains expert-validated explanations for every rule in this guide. Challenge rules, read citations, and see real-world case studies from installers.